This is topic Cam Selection in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022071
Posted by jescalante (Member # 7565) on :
 
Running stock rotating assembly. (crank and heads) wondering what would be a good cam selection for now. Thinking about nos. Have 373 gears, bbk headers, basani x-pipe with 40 series flowmasters. Want to upper and lower also.
 
Posted by fasthatch (Member # 7277) on :
 
quote:
Originally posted by jescalante:
Running stock rotating assembly. (crank and heads) wondering what would be a good cam selection for now. Thinking about nos. Have 373 gears, bbk headers, basani x-pipe with 40 series flowmasters. Want to upper and lower also.
with stock heads i wouldn't run a cam.i would go with some roller rockers

[ April 08, 2010, 08:25 PM: Message edited by: fasthatch ]
 
Posted by jescalante (Member # 7565) on :
 
What would that do for me?
 
Posted by 707vibrantcobra93 (Member # 4702) on :
 
With stck heads I would run... Aftermarket heads. Cam would be a waste basically just installng it for the sound.
 
Posted by Big block 66 f100 (Member # 8867) on :
 
b cam is my fav on a mild setup
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com