This is topic 13" rotors on a sn95 gt stock in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021877
Posted by 510SN95 (Member # 9406) on
:
What would be needed to put 13 " rotor on my stock gt rear end or is it as easy as just take off n put on? Any help or pics on topic thanxz
Posted by jaejae (Member # 7958) on
:
the 13 inch rotors are for the front 11.65 are for the rear..if you talkin bout the cobra brakes
Posted by Musttanguy (Member # 2251) on
:
There is a 13" setup for the rear available, involves unbolting caliper and bracket, installing small adapter bracket and reinstalling new 13" rotor and caliper.
Posted by JohnB (Member # 969) on
:
Big brake package
Read up on a Mustang magazine's install. Basically, you need upgraded caliper mounting brackets, caliper bridges, and rotors.
Posted by Ty (Member # 4920) on
:
i would assume that your going to need at least a 17 inch rim to accomodate those also
Posted by Blind (Member # 3052) on
:
that rear 13" brake kit uses single disc solid rotors, not dual disc vented rotors like the 11.65" cobra brakes.
aka - the cobra brakes work better, but if you're doing it for looks...go for the baer kit.
Posted by 510SN95 (Member # 9406) on
:
Thats good to know now if i wanted to throw 13" in the front would it be the same or diff.?
Fueled by Ford Mustang Owners
on CaliforniaFords.com