This is topic removing t5 out of car in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021641
Posted by trickflow211 (Member # 8503) on
:
hey i am going to be removing a t-5 transmission out of a 87 5.0 mustang tomorrow so i can get the transmission rebuilt, what would be the easyiest way to remove this transmission from the car?. your help would be greatly appreciated! thanks!.
Posted by MikeD. (Member # 8060) on
:
1 bolt at a time.
Posted by jaejae (Member # 7958) on
:
its fairly simple..unbolt the exhaust,unbolt the crossmember and clutch cable,then unbolt the tranny from the bellhousing..should come right out..and you might as well replace the clutch while you in there
Posted by turbo50 (Member # 6700) on
:
You are in concord? I will remove it and install it for you for $160
Posted by Duncan Motors (Member # 7045) on
:
160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
Posted by trickflow211 (Member # 8503) on
:
thanks guys, and i am going to get it rebuilt, and then put it into my 90 AOD. =] hopefully it stops sprinkling so i can get outside and do it!
Posted by 50 Deep (Member # 6216) on
:
Yeah probably best just to remove the trans from the bellhousing. Much easier process if you don't need to mess with the clutch
Posted by Sic Beast (Member # 6771) on
:
quote:
Originally posted by Duncan Motors:
160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
+1
That is way cheap for tranny work
Posted by rollin5ive0 (Member # 8592) on
:
quote:
Originally posted by Sic Beast:
quote:
Originally posted by Duncan Motors:
160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
+1
That is way cheap for tranny work
cheap work comes along with a cheap job i always say!! naw turbo50 is a good mechanic go with him....shit i usually pull my own trannys but for 160 i might have him do it!!
Posted by drop88stang (Member # 9650) on
:
Yeah thats cheap I might need you to do mine in a few weeks how long would it take to get it finished?
Fueled by Ford Mustang Owners
on CaliforniaFords.com