This is topic which is better in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021560
Posted by cobraclone (Member # 8275) on :
 
a dyno tuned speed density car or tuned mass air car and why
 
Posted by fasthatch (Member # 7277) on :
 
stock pcm or stand alone
 
Posted by 50Reasons (Member # 6452) on :
 
Hard to tune a speed density car than a maf car with any mods done to the car

[ January 24, 2010, 01:52 AM: Message edited by: 50Reasons ]
 
Posted by Blind (Member # 3052) on :
 
most stand alone systems are speed density, most of the fastest cars in the world are tuned without a MAF.
 
Posted by 707vibrantcobra93 (Member # 4702) on :
 
Carb [patriot] [burnout]
 
Posted by Blubyu87gt (Member # 9427) on :
 
If you plan to cam the car go MAF unless as stated earlier you are going stand alone.. I did the Ecam and 1.7s and had horrible cam surge, ran lean as shit, and all around was a pain in the ass... Did the MAF swap and the car felt and responded a million times better..
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com