This is topic trans fluid 5 speed in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021504
Posted by ponielx1988 (Member # 2116) on
:
looking to change the fluid in my 2000 transmission (5 speed) what king of gear oil do i use and how much. thanx
Posted by Blind (Member # 3052) on
:
2.5-3 qts of dexron III ATF (automatic transmission fluid)
basically drain and fill until you can feel the fluid through the side fill hole.
Posted by 87coupe510 (Member # 6150) on
:
quote:
Originally posted by Blind:
2.5-3 qts of dexron III ATF (automatic transmission fluid)
basically drain and fill until you can feel the fluid through the side fill hole.
+1
Posted by street_illegal_stang (Member # 1554) on
:
quick question>
can I use dextron III in my tremec tr3550 5speed?
The gm sychromesh cost alot and I cant seem to find dextron II anywhere. Just curious if there is any other compatible trans fluid availible
Thanks
[ January 16, 2010, 12:43 AM: Message edited by: street_illegal_stang ]
Posted by fasthatch (Member # 7277) on
:
quote:
Originally posted by street_illegal_stang:
quick question>
can I use dextron III in my tremec tr3550 5speed?
The gm sychromesh cost alot and I cant seem to find dextron II anywhere. Just curious if there is any other compatible trans fluid availible
Thanks
they dont make dextron 2 any more dextron 3 took it place
Posted by 1HaTCheD5LiTEr (Member # 8269) on
:
quote:
Originally posted by street_illegal_stang:
quick question>
can I use dextron III in my tremec tr3550 5speed?
The gm sychromesh cost alot and I cant seem to find dextron II anywhere. Just curious if there is any other compatible trans fluid availible
Thanks
Use anything that is Dex/merc approved. You can use Dex/merc III, IV, or V but do not use synchromesh as it is thicker than ATF. We use ATF because the ATF is thin enough to mesh in with the roller bearings and the synchros.
Fueled by Ford Mustang Owners
on CaliforniaFords.com