This is topic MM roll bar in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021315
Posted by biggmac (Member # 8541) on
:
To the people that have a MM roll bar installed...I want to buy one ( the 4 point ) and the two bars that go back and bolt to the rear wheel well have the nuts on the out side just above the tire. Do they rub?? I am lowered with the pro eibach springs. I like the somewhat plug and play of this roll bar but I dont really like the bolts poking above the rear ties.... How has this fit on your car?
Posted by Sic Wit it 50 (Member # 4119) on
:
I have one n my coupe. N I put the bolt in thru the outside with the head of the bolt in the wheel well puting the threads inside so its pushing in on the seat n not torwards ur tires....
Posted by dubfive-0 (Member # 8965) on
:
I had mine welded I didnt wanted to deal with water getting in the cabin, dust
Posted by biggmac (Member # 8541) on
:
You weld the front and back? Did the roll bar come welded to the back support? Or does it come unwelded from MM?
Posted by biggmac (Member # 8541) on
:
Got pics?
Posted by dubfive-0 (Member # 8965) on
:
ill get pictures tomorrow and it was already pre-assambled
Posted by biggmac (Member # 8541) on
:
Cool big dub! Any pics on how the rear panals were trimmed would be great too!
[ December 16, 2009, 11:49 PM: Message edited by: biggmac ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com