This is topic Cylinder head question in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021147

---

Posted by cflores (Member # 7319) on :
 
So then I was wondering if anyone on here knew the part number for ARP rocker studs that I can use on a set of performers heads???
 

---

Posted by JohnB (Member # 969) on :
 
What size and type of rockers?
 

---

Posted by cflores (Member # 7319) on :
 
here are the actual rockers from summit, SUM-G6942B, the heads are the edelbrock performers 1.90/1.60. the casting number is 6025 but they are the 1.90's I measured out the intake valve. thanks again.
 

---

Posted by JohnB (Member # 969) on :
 
It will be a 3/8 x 3/8" stud, just depends on what you're running for a guideplate. Most likely you'll need a 2.250 or longer setup.
 

---

Posted by cflores (Member # 7319) on :
 
coo thanks john.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com