quote:

---

Originally posted by 89bluenotch:
Are you moving the power steering pump up?? I run either the 70inch or the 69.5

---

there are two different ways to run the belt, both will work I prefer the one on the left because it doesn't push the belt close to itself

the one on the left is how i run mine ( ford AC delete kit no smog pump or pully in its place, on my setup I use a 73.in belt.


 

---

Posted by 89bluenotch (Member # 7454) on :
 
I use the set-up on the right. although i haven't had a problem i'll try the other setup next time.
 

---

Posted by threethirty1 (Member # 7814) on :
 
on the diagram on the left, does the pump need to be removed? Or can it stay in place and be bypassed?
 

---

Posted by 68stanger (Member # 7842) on :
 

quote:

---

Originally posted by threethirty1:
on the diagram on the left, does the pump need to be removed? Or can it stay in place and be bypassed?

---

quote:

---

Originally posted by threethirty1:
I have no ac though

---

quote:

---

Originally posted by threethirty1:
nice, thx man, how did you plug the holes in the back of the heads? I have emmissions legal afr 185's. thanks, sorry for the thread jack svorick

---

got the same exact heads, well i didn't want to spend $10 a plug plus another 10 to ship them from summit so i went to home depot and grabed some correct sized bolts, not sure exactly what size threads (been a couple years) I think they were 5/8-11 course thread and the length was around 3/4 - 1 inch

edit - if your going to use the actual plugs they are called thermactor plugs

[ November 16, 2009, 02:56 PM: Message edited by: 68stanger ]
 

---

Posted by threethirty1 (Member # 7814) on :
 
nice,thanks for the good info man. Im a dump this smog stuff, lose a little weight.
 

---

Posted by jaejae (Member # 7958) on :
 
use the one on the left rick..im using the one on the right and its close as hell..it will eventually touch and end up breaking..just get the 73 inch belt
 

---

Posted by 84SVOrick (Member # 9039) on :
 
Ight ill take ur word jae jae, no problem bout the thread jack I think we all do it. But I'm planning on getting the trick flow kit (only $35) good deal n my mind
 

---

Posted by jaejae (Member # 7958) on :
 

quote:

---

Originally posted by 84SVOrick:
Ight ill take ur word jae jae, no problem bout the thread jack I think we all do it. But I'm planning on getting the trick flow kit (only $35) good deal n my mind

---

quote:

---

Originally posted by SSF 50:
i think the ford racing 1 looks way better than the trick flow setup. an wit the ford racing setup 4sure go wit the setup on the left the right pic setup cuts it very close (me no good)

---