Author
|
Topic: longtubes install...
|
Jaejae5.0
¯
Member # 7958
|
posted
installing my longtubes tomorrow..there hooker headers with a 3 inch collector..need some advice to make this go by a little easier..i know i gotta jack up the motor some..but any more tips to make this simpler..thanks
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
89bluenotch
¯
Member # 7454
|
posted
dunno bout the hookers...but for my BBK longtubes one had to go in from the top and the other from the bottom.
-------------------- -Gunnar 89 coupe 54 f100 R.I.P. SILVERLX
Posts: 1857 | From: HEALDSBURG | Registered: Feb 2007
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
quote: Originally posted by 89bluenotch: dunno bout the hookers...but for my BBK longtubes one had to go in from the top and the other from the bottom.
same here, from the top for the passenger side and from the bottom on the drivers. had to loosen up the motor mount bolts ( on the k-member side ) to raise the motor up a liitle to help with the drivers side.
-------------------- It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
remove the steering shaft it will make it easyier
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
quote: Originally posted by fasthatch: remove the steering shaft it will make it easyier
if i remove the steering shaft can i put it in thru the top?
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote: Originally posted by jaejae: quote: Originally posted by fasthatch: remove the steering shaft it will make it easyier
if i remove the steering shaft can i put it in thru the top?
no just make easy to work with
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
84SVOrick
¯
Member # 9039
|
posted
Didn't need to jack the motor when I did my bbks
-------------------- Bay Area Stunnaz RIP Jeannera "FOXY302" 10/29/87-10/9/10 1984 SVO 302 HCI a basic bitch 1986 GT FOXY302 stolen and totaled R.I.P.
Posts: 1928 | From: Vallejo CA | Registered: Mar 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
quote: Originally posted by jaejae: ..need some advice to make this go by a little easier...but any more tips to make this simpler..thanks
Put them back in the box, post them on Craigslist, make a few dollars, and keep your shorties and ground clearance.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
quote: Originally posted by 84SVOrick: Didn't need to jack the motor when I did my bbks
dunno.. maybe its the reason I did not have to touch the steering shaft when mine went in. its probably bought me more room on my setup between the steering shaft and the engine.
-------------------- It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
1FAST89GT
¯
Member # 5071
|
posted
quote: Originally posted by JohnB: quote: Originally posted by jaejae: ..need some advice to make this go by a little easier...but any more tips to make this simpler..thanks
Put them back in the box, post them on Craigslist, make a few dollars, and keep your shorties and ground clearance.
+1
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
quote: Originally posted by 1FAST89GT: quote: Originally posted by JohnB: quote: Originally posted by jaejae: ..need some advice to make this go by a little easier...but any more tips to make this simpler..thanks
Put them back in the box, post them on Craigslist, make a few dollars, and keep your shorties and ground clearance.
+1
traded my shorties and a 100$ for the longtubes and matching h pipe..cant beat that deal
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Put it on jackstands a minimum of 2' off the ground, use a hoist to lift the motor, and disconnect the steering shaft.
I dunno if I'd call that a deal...you still gotta deal with trying to get a smog if you leave them on, they don't pass visual, loss of ground clearance on a lowered car, etc...
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
quote: Originally posted by JohnB: Put it on jackstands a minimum of 2' off the ground, use a hoist to lift the motor, and disconnect the steering shaft.
I dunno if I'd call that a deal...you still gotta deal with trying to get a smog if you leave them on, they don't pass visual, loss of ground clearance on a lowered car, etc...
iight..john i have no smog equipment anyways..but that is true..thanks..
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
RODRIGUEZ
¯
Member # 9104
|
posted
quote: Originally posted by JohnB: Put it on jackstands a minimum of 2' off the ground, use a hoist to lift the motor, and disconnect the steering shaft.
I dunno if I'd call that a deal...you still gotta deal with trying to get a smog if you leave them on, they don't pass visual, loss of ground clearance on a lowered car, etc...
Very true, what said above is what keeping me back for going with longtubes...
Posts: 1182 | From: East Bay | Registered: Apr 2009
| :
|
|
90GT510
¯
Member # 9199
|
posted
jaejae let me kno if your happy with the hookers, ive been leaning toward getting hooker lt's also.
Posts: 1725 | From: East Bay/Dallas, TX | Registered: May 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
quote: Originally posted by jaejae: quote: Originally posted by JohnB: Put it on jackstands a minimum of 2' off the ground, use a hoist to lift the motor, and disconnect the steering shaft. I dunno if I'd call that a deal...you still gotta deal with trying to get a smog if you leave them on, they don't pass visual, loss of ground clearance on a lowered car, etc...
iight..john i have no smog equipment anyways..but that is true..thanks..
No problem. Good luck with the install!
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
BCINGUU
¯
Member # 2397
|
posted
I :heart: my longtubes - hella torque! I have longtubes on all 3 stangs, including 1-3/4" on teh cobra... Had no problems dropping them in from the top, no jacking or hoisting - but did have to clearance the firewall-to-floorpan corners a bit...
-------------------- 93 Cobra #4563 347ci 12.0@118 505rwhp 524tq 90 GT "Saleen Cobra" style convertible 347ci 67 GT "Eleanor" style coupe 347ci
Posts: 1425 | From: San Jose, CA | Registered: Jan 2003
| :
|
|
SHORTSHIFTER89
¯
Member # 7810
|
posted
my smog is in 2months and i got the shortys right now. but since my whole motor gotta come out for a overhaul playing with longtubes for 2 years might be kinda fun.
-------------------- 1989 Mustang 5.0 HCI NOW SUPERCHARGED 2013 Range Rover Sport 2011 Bmw 5501 twin turbo 530HP 1998 silverado c1500 cheyenne
Posts: 923 | From: 707 hillside | Registered: Jul 2007
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
this is not fun at all..especailly by yourself..all i gottado is bolt up the h pipe and im done
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
89bluenotch
¯
Member # 7454
|
posted
i had to do the same thing myself....i used the jack to help hold up the mid pipe, it saves you from getting really pissed off
-------------------- -Gunnar 89 coupe 54 f100 R.I.P. SILVERLX
Posts: 1857 | From: HEALDSBURG | Registered: Feb 2007
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
quote: Originally posted by 89bluenotch: i had to do the same thing myself....i used the jack to help hold up the mid pipe, it saves you from getting really pissed off
my hands are so sore..it hurts to make a fist..
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
blown95svt
¯
Member # 8893
|
posted
quote: Originally posted by BCINGUU: I :heart: my longtubes - hella torque! I have longtubes on all 3 stangs, including 1-3/4" on teh cobra... Had no problems dropping them in from the top, no jacking or hoisting - but did have to clearance the firewall-to-floorpan corners a bit...
once i went longtubes i never went back! wont put anything else on my cars.
Posts: 1434 | From: roseville | Registered: Jan 2009
| :
|
|
POWERED BY FORD
¯
Member # 9204
|
posted
quote: Originally posted by blown95svt: quote: Originally posted by BCINGUU: I :heart: my longtubes - hella torque! I have longtubes on all 3 stangs, including 1-3/4" on teh cobra... Had no problems dropping them in from the top, no jacking or hoisting - but did have to clearance the firewall-to-floorpan corners a bit...
once i went longtubes i never went back! wont put anything else on my cars.
+1!
Posts: 2204 | Registered: May 2009
| :
|
|
Duncan Motors
¯
Member # 7045
|
posted
touch yourself more and your hands wont hurt!
Posts: 6310 | From: Vallejo | Registered: Sep 2006
| :
|
|
Duncan Motors
¯
Member # 7045
|
posted
did you stroke your long tube before your install ?any lube they go in a little easyier!lol!
Posts: 6310 | From: Vallejo | Registered: Sep 2006
| :
|
|