This is topic 5 lug in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021088
Posted by FATALPNY408 (Member # 8896) on :
 
I was wondering who can put a 5 lug con on my mustang thanks
 
Posted by jaejae (Member # 7958) on :
 
you can...it simple..i did my own without doing it before..easy to figure out
 
Posted by FATALPNY408 (Member # 8896) on :
 
Wats the most difficult part
 
Posted by jaejae (Member # 7958) on :
 
prolly gettin the spindle off the balljoint..and make sure you have flare types wrenches for the brakes lines..or you strip them tryin with regular wrenches..give it a try its really simple
 
Posted by FATALPNY408 (Member # 8896) on :
 
Sounds simple but the problem is I'm limited on supplies
 
Posted by jaejae (Member # 7958) on :
 
quote:
Originally posted by FATALPNY408:
Sounds simple but the problem is I'm limited on supplies
supplies like tools?..im sure you have friends or family with tools dont you?
 
Posted by FATALPNY408 (Member # 8896) on :
 
Ya but I rather have someone else do it that's has done it and assures there job then me doing it and end up killing my self or somethin
 
Posted by RODRIGUEZ (Member # 9104) on :
 
quote:
Originally posted by FATALPNY408:
Ya but I rather have someone else do it that's has done it and assures there job then me doing it and end up killing my self or somethin
I doubt you kill yourself man, I know you have some kind of idea of what you are doing and some mechanical intelligence, unlike some dumb ass potheads I know that only drive hondas and chevy cavaliers [Roll Eyes]
 
Posted by fasthatch (Member # 7277) on :
 
i can do pm what you want done a what parts you have an i can give a price an i can come to you
 
Posted by FATALPNY408 (Member # 8896) on :
 
Lol thanks for the support bro I now I can do it but I don't wanna start it Nd not able to finish it I also worried about the e-brake cable
 
Posted by Musttanguy (Member # 2251) on :
 
I have a super nice front setup, everything you would need to convert the front to 5 lug using 94/95 spindles.
For the rear you can go with 2 LEFT Ranger axles and drums,If you go this route in the rear all you do is swap axles and drums, everything else remains the same.

I don't think you would have any problem at all swapping yourself. A few tools and a floor jack and you would be good to go.
 
Posted by FATALPNY408 (Member # 8896) on :
 
Dam so is it this easy to do it. I'm try it do it ma self if I run to any complicacions who's willing to help me let me now
 
Posted by FATALPNY408 (Member # 8896) on :
 
How long u guys think I'll take estimated time
 
Posted by jaejae (Member # 7958) on :
 
quote:
Originally posted by FATALPNY408:
How long u guys think I'll take estimated time
1 day
 
Posted by gercolla1 (Member # 3068) on :
 
quote:
Originally posted by jaejae:
quote:
Originally posted by FATALPNY408:
How long u guys think I'll take estimated time
1 day
nah more like 1 hour with a good spring compressor
n hand tools
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com