This is topic 67 mustang in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021034
Posted by THE4HORSEMEN (Member # 1006) on :
 
i was wondering if someone could help me out by telling me the easiest and cheapest way to make my 67 stang disc brakes in the rear thanks.
 
Posted by Duncan Motors (Member # 7045) on :
 
rumors of police crown vics are good donors call jermy 704 9118 hell know.hes done this on a small bearing 9inch same as a 8inch
 
Posted by 92stangLX (Member # 3252) on :
 
Cheap and easy usually don't go together when talking about modding your car [Smile]

Here is a cheap way

http://www.mustangsplus.com/tech/versaill/index.htm

An easier way would be to buy a SSBC rear disc conversion kit. However, you can expect to pay $800 for one of these.
 
Posted by wilit (Member # 3367) on :
 
Vintage Venom has a complete kit for $556

Or if you want to go the junkyard route, here's a how-to on doing the Crown Vic swap to a small bearing housing (this is what your 8" rear has).
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com