This is topic '88 HO ECU with a '93 harness? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=020993

---

Posted by phildog (Member # 1214) on :
 
I have an SVO with a V8 swap. When the conversion was done with a complete 1993 harness, I used a '93 Cobra kit, with the 24lb injectors, reman. ECU and the 70mm MAF. Ran perfect, no issues.

Here's the question: For the time being, just to get this thing back on the road, I'm swapping in a 100% stock '88 GT motor. Can I run the corresponding stock MAF, 1988 engine harness and stock '88 GT ECU with my '93 ECU to engine harness?

THanks for the help.
 

---

Posted by Duncan Motors (Member # 7045) on :
 
engine harness is the same, need the correct mass for injecters like anyhthing else but the 93 cobra set up. and the computer will work to, have fun driving
 

---

Posted by phildog (Member # 1214) on :
 
Right on, that's what I was hoping to hear. I don't want to be chasing some phantom electrical gremlin once I get ready to turn the key.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com