This is topic center caps dont fit my 95 spindle in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=020876
Posted by manow92 (Member # 9078) on
:
i have a 92 with 95 spindles,x2 steeda ball joints and saleen 9inch replicas,and 13"bear breaks.the weeles fit but the center cap wont fit becouse of the dust caps.i have spacers and that works eccept the weele studs are to short.any one know how to get longer studs and any sugestions on what brand of bumpsteer kit i should go with?Any help would be so helpfull ,ive seached the net for days.....nothing
Posted by LETHL 03 (Member # 5401) on
:
shave some of the inside of the cap.
Posted by ratfast (Member # 8720) on
:
The '95 bearing should be sealed. Remove the dust cap and see if the center cap and wheel fit. If it does you can either leave it off (The center cap and wheel bolted tightly to the hub will keep crap off the bearing) or pound the dust cap down with a hammer around the nut and the threads on the spindle.
Posted by Sic Beast (Member # 6771) on
:
quote:
Originally posted by ratfast:
pound the dust cap down with a hammer around the nut and the threads on the spindle.
+1. Did the same thing and took care of my problem.
Fueled by Ford Mustang Owners
on CaliforniaFords.com