This is topic what size mass flo air meter do I need? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=020715
Posted by kerry's 50 (Member # 9266) on
:
I have a 1994 5.0 that I bought a couple of months ago and when I bought it was told that I needed a stock mass flow air sensor. He said it had a bigger one than it needs and when I come to a stop it always wants to die out. I don't know what size the injectors are but he said the motor is bone stock apart from the cold air intake. does anybody know what I actually need to fix this problem? Thanks in advance.
Posted by 84SVOrick (Member # 9039) on
:
Doesn't sound like a mass air flow sensor, sounds like an idle air control valve or tps, could even b as simple as timing.
Posted by Adam5.0 (Member # 6995) on
:
you probably have one calibrated for bigger injectors. try getting a stock one and swapping it in to see if it solves the problem
Posted by kerry's 50 (Member # 9266) on
:
The guy said it was for bigger injectors. so 19lb. injectors is what comes stock for 94 5.0's right. does it matter what mm maf? what is the stock mm i;m lookin for?do I need the air meter along with the sensor or just the sensor alone?thanks for the help.
[ September 05, 2009, 12:21 AM: Message edited by: kerry's 50 ]
Posted by kerry's 50 (Member # 9266) on
:
thanks to everyone for the help. i got a stock sensor and that seemed to do the trick, thanks again.
Posted by chevyeatr (Member # 7603) on
:
so my meter actually worked haha jp man. well i'm glad i could help. it was koo meeting u. u goin to the cruise?
Posted by kerry's 50 (Member # 9266) on
:
good lookin jonny for the maf. what cruise are you talking about?
Posted by chevyeatr (Member # 7603) on
:
The one on October 3rd
Fueled by Ford Mustang Owners
on CaliforniaFords.com