Author
|
Topic: c&l question.
|
MikeD.
¯
Member # 8060
|
posted
I have one now for 19's but i want to go 24's. Can a calibration tube really make the car run right with 24's? I guess I just really can't see how it works. If someone can kinda elaberate on it I would appreciate it. I feel like you cant really trust it.. Thanks!
-------------------- 1999 FRC Vette 12.77 @ 110
Posts: 2854 | From: Vacaville Ca, 707 | Registered: Nov 2007
| :
|
|
SacStangDriver
¯
Member # 8304
|
posted
yea, i had the 76mm c&l you just have to get the tube for the 24's
-------------------- Need sidework done at great prices? I work on all makes and models from engine work to gears. Check engine light problems too. 916 912 3493
Posts: 1217 | From: sacramento | Registered: Mar 2008
| :
|
|
MikeD.
¯
Member # 8060
|
posted
Like, I know they work, I just want to know how.. lol. Does it really take advantage of the injectors or just make it run rich?
-------------------- 1999 FRC Vette 12.77 @ 110
Posts: 2854 | From: Vacaville Ca, 707 | Registered: Nov 2007
| :
|
|
84SVOrick
¯
Member # 9039
|
posted
Basically its gonna regulate how much air and fuel the intake will receive, when u have 24s the resistance is different then 19s so basically if u run 24s without the calibration ur losing power and wastin gas.
Hope that helped
-------------------- Bay Area Stunnaz RIP Jeannera "FOXY302" 10/29/87-10/9/10 1984 SVO 302 HCI a basic bitch 1986 GT FOXY302 stolen and totaled R.I.P.
Posts: 1928 | From: Vallejo CA | Registered: Mar 2009
| :
|
|
MikeD.
¯
Member # 8060
|
posted
So does the tube just trick the MAF into telling the computer theres more air coming in and to increase the fuel?
-------------------- 1999 FRC Vette 12.77 @ 110
Posts: 2854 | From: Vacaville Ca, 707 | Registered: Nov 2007
| :
|
|
84SVOrick
¯
Member # 9039
|
posted
Well on any maf that is calibrated has the additional tube inside that senses the change versus a stock setting that is not set and unchangable. So it can be change between 24 and 30 also I believe.
But I guess u can say it tricks it.
-------------------- Bay Area Stunnaz RIP Jeannera "FOXY302" 10/29/87-10/9/10 1984 SVO 302 HCI a basic bitch 1986 GT FOXY302 stolen and totaled R.I.P.
Posts: 1928 | From: Vallejo CA | Registered: Mar 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
EHow for the win...
A hot wire sensor works by passing an electrical current through a wire suspended in the engine's air stream, heating it. As the temperature increases, the wire's electrical resistance increases, limiting the amount of electrical current which can flow through the circuit attached to the wire. As air intake increases, the passing air cools the wire, decreasing its resistance and increasing the amount of electricity passing through the circuit. The wire's temperature is set to maintain equilibrium with the passing air, so the current increases only when the air intake increases. Likewise, the current decreases when the air intake decreases from the norm. These changes in current flow are registered by the engine control unit and translated into the relevant information for the ECU to make the necessary changes to account for the new intake level. These types of sensors are very accurate, however they are fragile. Any dirt or oil can contaminate the wire and cause an inaccurate reading.
Note the "passing air" part of this. The sample tube decreases/increases it accordingly.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
turbo50
¯
Member # 6700
|
posted
They are called sample tubes for a reason.
Here is a plethora of information:
http://www.superstang.com/maf.htm
Enjoy.
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|