Author
|
Topic: gt40p heads new valve spring install how
|
dean-93
¯
Member # 9401
|
posted
First whats the best valve springs to use with a trick flow stage 1 cam. Do i need the hole kit or just the springs.How hard is it to do it your self. Thanks DEANSTA510.
-------------------- 93 5.0 trickflow h/c/i
Posts: 1175 | From: novato and fairfeild | Registered: Aug 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
You need the entire kit. More than likely you don't have extra shims laying around and I'd never trust locks with tons of miles on them. As for installing them, unless you have the knowhow and tools to tear them down, I wouldn't mess with them.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
dean-93
¯
Member # 9401
|
posted
Why is it that hard to do it your self.If I buy the right spring compressor tool should be easy i hope.
-------------------- 93 5.0 trickflow h/c/i
Posts: 1175 | From: novato and fairfeild | Registered: Aug 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
quote: Originally posted by deansta510: Why is it that hard to do it your self.If I buy the right spring compressor tool should be easy i hope.
If it's so easy, why are you here asking questions?
If you have the tools, and I'm not talking that flimsy spring compressor sold at Kragen/Autozone/KMart...you should be fine, barring you remember how it comes apart/goes together and you follow the directions provided.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
....and I hope you're talking about doing them OFF the car. On the car is a totally different situation.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
dean-93
¯
Member # 9401
|
posted
Yes they are off the car.It my first time doing it that why Iam asking.To me it look easy but just making sure with other who might have done it them selves.
-------------------- 93 5.0 trickflow h/c/i
Posts: 1175 | From: novato and fairfeild | Registered: Aug 2009
| :
|
|
LQ9SN95
¯
Member # 7080
|
posted
quote: Originally posted by deansta510: Yes they are off the car.It my first time doing it that why Iam asking.To me it look easy but just making sure with other who might have done it them selves.
Easier said than done. Trust me and JohnB that it is crucial that valve springs be installed correctly. i'd have a machine shop or someone knowledgeable do it or you can seriously damage your engine if incorrectly installed
-------------------- http://www.fastgms-teamfast.com http://www.facebook.com/aop.fresno?ref=ts&fref=ts Lq9 swap 102 fast intake Trick flow heads T rex cam
Posts: 8031 | From: Fresno, Ca | Registered: Sep 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
Ive done it a few times and have some pics of it in my photo album but I must tell you that a machine shop wont charge much at all to install them for you if you bring the right, NEW parts down.
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
|
|
|
asskickn88
¯
Member # 4957
|
posted
It's not just being able to get the springs off and back on, its setting the correct spring height with shims. You need the correct tool to measure how many shims you need. If you don't set them up right the spring rate will be off, you can have the perfect spring and either have coil bind or valve float. Buy the kit and take it to a machine shop or someone that really knows what they are doing.
-------------------- Three 540 Bimmers and a 5.0 Explorer.... got a Ford back in the stable!
It's time for the country to do what Obama's own father did. Abandon him.
Posts: 6069 | From: Rocklin, Ca | Registered: Oct 2004
| :
|
|
dean-93
¯
Member # 9401
|
posted
The tfs-2500100 kit comes with the measuring tool and instructions. Other forums members say the kit is not that hard to install :eek
-------------------- 93 5.0 trickflow h/c/i
Posts: 1175 | From: novato and fairfeild | Registered: Aug 2009
| :
|
|
LQ9SN95
¯
Member # 7080
|
posted
quote: Originally posted by deansta510: The tfs-2500100 kit comes with the measuring tool and instructions. Other forums members say the kit is not that hard to install :eek
the kit is good, i use to have it on my gt40 heads. but the tool it comes with sucks ass. just have a machine shop install the kit will save u time, money, and problems in the long run
-------------------- http://www.fastgms-teamfast.com http://www.facebook.com/aop.fresno?ref=ts&fref=ts Lq9 swap 102 fast intake Trick flow heads T rex cam
Posts: 8031 | From: Fresno, Ca | Registered: Sep 2006
| :
|
|
dean-93
¯
Member # 9401
|
posted
Thanks for the info.The head are going to the machine shop.For 50.00 the shop will install and make sure they are set to proper spec.
-------------------- 93 5.0 trickflow h/c/i
Posts: 1175 | From: novato and fairfeild | Registered: Aug 2009
| :
|
|
|