This is topic Anyone Dyno a TrickFlow h/c/i blown 306 in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=020607
Posted by biggmac (Member # 8541) on :
 
Hey fellas , anybody know or seen some RWHP #,s on a low boost 5-6 lb, Trickflow H/C/I 306? (The TF "street" intake version with all supporting mods ).
 
Posted by SPTVENM (Member # 7080) on :
 
high 300' low 400's im guessing.....will make good power [patriot]
 
Posted by biggmac (Member # 8541) on :
 
Sounds good! .... Ya think ya can get it to pass the sniffer too?
 
Posted by 92stangLX (Member # 3252) on :
 
I am guessing between 350-375 rwhp. It should pass smog as long as everything is carb legal.
 
Posted by SPTVENM (Member # 7080) on :
 
quote:
Originally posted by biggmac:
Sounds good! .... Ya think ya can get it to pass the sniffer too?
is it the whole trick flow kit?

if so......it should pass the sniffer
 
Posted by biggmac (Member # 8541) on :
 
Yep the whole kit.Just wondring the rwhp on the kit with a 5-6 lb of boost makes. I personally havent seen any #,s on this, but I know its been done many a time
 
Posted by JohnB (Member # 969) on :
 
The kit should make an honest 300rwhp on a healthy stock shortblock. Figure about 60-70 hp for the 6#'s, you're right with the guesses previously stated.
 
Posted by jaejae (Member # 7958) on :
 
check this out..405 rwhp with trickflow heads and vortech v3 sci trim 6# of boost

http://www.musclemustangfastfords.com/tech/mmfp_0909_vortech_V3_sci_supercharger_mustang_5l_engine_kit_upgrade/supercharger.html
 
Posted by 166 Merlot (Member # 1549) on :
 
i made 435rw on 12#s. 130k mile motor
 
Posted by biggmac (Member # 8541) on :
 
Dam ! Thats pleanty of HP for such a simple engine Combo.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com