This is topic t 5 tranny in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=020480
Posted by 916 ceez (Member # 8841) on :
 
will a t5 from a 95 cobra fit my 93 x chp or what do i have to change on it. manual
 
Posted by jordan_0806 (Member # 5888) on :
 
quote:
Originally posted by 916 ceez:
will a t5 from a 95 cobra fit my 93 x chp or what do i have to change on it. manual
you'll need a bell housing from a 94/95; fox one wont work...
 
Posted by 91fox (Member # 7842) on :
 
you will need a fox bell and a 85-93 input shaft because the 94-95 input is longer
 
Posted by 91fox (Member # 7842) on :
 
85-93 input will work but try and use a
90-93 input because they are a little stronger
 
Posted by gercolla1 (Member # 3068) on :
 
or just have a shop cut ur drive shaft down [patriot]
 
Posted by BlowN67 (Member # 4229) on :
 
quote:
Originally posted by jordan_0806:
quote:
Originally posted by 916 ceez:
will a t5 from a 95 cobra fit my 93 x chp or what do i have to change on it. manual
you'll need a bell housing from a 94/95; fox one wont work...
100% correct an the other three are wrong beside the input yes is longer so thats why u need to run the 94/95 bell. . also u can run a fox tranny in a sn95 if u use the fox bell housing seen it first hand

[ July 25, 2009, 02:32 PM: Message edited by: BlowN67 ]
 
Posted by 91fox (Member # 7842) on :
 
well it would work but it would also place the trans tail further back and you could cram the driveshaft yolk too far into the tail shaft. but that is a worst case scenario. changing out the input and bell is not hard and will assure you a problem free fox style T5.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com