This is topic need help install h pipe in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=020025
Posted by STICKYMICKYS4.6 (Member # 9149) on :
 
need help to remove stock h pipe on a 2002 mustang gt and install off roads. cant loosen pass side nut what do i need to remove them or anyone want to take a side job
 
Posted by Blind (Member # 3052) on :
 
jack it up
unplug and remove the o2 sensors
get a 3/8" universal swivel
2 or 3 extensions, about 2 feet total length
ratchet if you have man arms, or a breaker bar if you're a girl [Razz]

it's really easy on sn95's
 
Posted by snakebit95 (Member # 8871) on :
 
+1 I just did my 2 weeks ago to pass smog. i used 3 extensions. i also used a small ratchet on top and locked it against the vale cover. use some sort of lubricant to help loosen bolts. very important!!
when you go to install off road, make sure you tighten the rear bolts completly before you do the bolts on you headers for proper alignment, or you will have a nasty leak. I learned the hard way. [patriot]
 
Posted by blown95svt (Member # 8893) on :
 
Take it to a shop and have them impact those bad boys off and just snugg em up and do it at home, I'm sure it would only cost ya a couple bucks!
 
Posted by 92stangLX (Member # 3252) on :
 
the breaker bar is ur friend [Smile] So is penetrating oil [Big Grin]
 
Posted by LS1EATR (Member # 2702) on :
 
bring it to my dads shop....let me know
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com