This is topic Wheel widenning in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=019914
Posted by KeithStang7 (Member # 1945) on
:
I have been told that the Wheel Emporium is great at fixing dented wheels. Do they widen them too? How wide can I go in the back of a 94 w/o the quad shocks and mini tub. Thanks to people with info.
Posted by STOCK GT (Member # 5139) on
:
i have a pair of saleens widened to 18/12 done by weldcraft wheels in michigan did an excellent job i have 345/30/18 on a mini tub fox body and it still clears by about 2'' on stock legnth axle
(weldcraft wheels,contact james 734-420-2211)
Posted by trickflow211 (Member # 8503) on
:
What size were the saleens before? And how much did that cosst you?.
Posted by 166 Merlot (Member # 1549) on
:
post a pic!
Posted by STOCK GT (Member # 5139) on
:
they were originally 18/9 then widened to 18/12 they also narrowed the fronts from 18/9 to 18/7 so they fix,widen,narrow. check out weldcraftwheels.com i'll post pix hopefully tonight or tomorrow.
Posted by STOCK GT (Member # 5139) on
:
the widening cost me $550.00 plus shipping both ways.
Posted by Saleenssc14 (Member # 7791) on
:
i took my saleen wheels to stockton wheels
Posted by KeithStang7 (Member # 1945) on
:
quote:
Originally posted by STOCK GT:
i have a pair of saleens widened to 18/12 done by weldcraft wheels in michigan did an excellent job i have 345/30/18 on a mini tub fox body and it still clears by about 2'' on stock legnth axle
(weldcraft wheels,contact james 734-420-2211)
So if I have them widened to 12" I'll be safe as far as clearance? Funny....my rims are Saleens too. How much did Stockton Wheel charge? Thanks for the info everyone
Posted by Jawsgear (Member # 8080) on
:
Give BJ a call at Precision Wheel in Sacramento.
Jeff
Posted by 68gtscode (Member # 8679) on
:
I am not an expert, but I believe you will only be able to fit an 11" wheel under your car w/o mini tubs. You need 7" backspace for this combo, so you're likely going to have to run a spacer (since the added width will be on the inside of the wheel). I am not certain, but you may have to remove the quad shocks too, but I don't think this is a problem if you have a good set of control arms.
I am not sure about other places, but Weldcraft over in Michigan has a good reputation for widening wheels. Good luck,
Matt
Posted by KeithStang7 (Member # 1945) on
:
Thanks for all the leads and info. As soon as I get my coil overs for the rear. I'll be contacting JohnB for the install of the MM TA and PHB.
Fueled by Ford Mustang Owners
on CaliforniaFords.com