This is topic Ported 03 04 cobra blower??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=019862
Posted by 03SVTNOJK (Member # 8170) on :
 
I am thinking to get a ported blower just wondering how hard is it to take it off and would these mods will get my cobra to 500hp well Stage 3 ported 2.76pulley,4#lower,offroad x,catback ,tuned or should i go with stage 5 and where togo to a good tuneing place and dyno [patriot]
 
Posted by 1SicSVT (Member # 8991) on :
 
idk how hard it is to take off or whatever but i know with those mods youll be above 500hp
 
Posted by FoX GT (Member # 4587) on :
 
depends on what you've done before. It's really not that hard. Make sure to clean the intercooler when you pull it. Get a stage 5, if you're porting it, go ahead and port it.
 
Posted by 92stangLX (Member # 3252) on :
 
You should be able to hit 500rwhp with that setup. I would consider the stage 5 (assuming you are talking about the Steigy port?) and also porting the plenum and switching throttle bodies.

You should throw an upgraded heat exchanger and CAI onto your parts list too [patriot]
 
Posted by KeithStang7 (Member # 1945) on :
 
Get a Kenne Bell Mammoth and be done with it. [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com