This is topic WERES A MACHINE SHOP in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=019484
Posted by 427 StRoKeR SN94 (Member # 8722) on :
 
any body know were a good one is with decent prices around hayward or fremont area?
 
Posted by RRRCobraSC281 (Member # 7086) on :
 
What do you need done?
 
Posted by 1SLOWLX (Member # 558) on :
 
I hear good things about daves engine and machine
 
Posted by 427 StRoKeR SN94 (Member # 8722) on :
 
valve springs put on and resize the cut the spring sits on
 
Posted by 427 StRoKeR SN94 (Member # 8722) on :
 
quote:
Originally posted by 1SLOWLX:
I hear good things about daves engine and machine
weres that at
 
Posted by 1SLOWLX (Member # 558) on :
 
1-510-797-9536 newark
 
Posted by Jim Nelson (Member # 8929) on :
 
I have used Dave and Angie for years they are by far the best around.Quality Quality Quality
 
Posted by Fast92lxcoupe (Member # 8221) on :
 
Al hubbards In hayward 510 537 1885. good people, good reputation and reasanble prices. Ive used them and I will use them again to rebuild my small block chevy.
 
Posted by stangin' (Member # 514) on :
 
if i bring in a set of used heads with rockers and springs already on there, what do i tell them or ask for?

i've never gone through the process of getting heads machined/checked. i just bought a set of used gt40 heads and i obliviously want them checked out first before they go on the car. i just don't want to get ripped off b/c i don't know/understand what they're doing.

thanks.
 
Posted by HaulinAss Motorsports (Member # 541) on :
 
quote:
Originally posted by Jim Nelson:
I have used Dave and Angie for years they are by far the best around.Quality Quality Quality
x2 [Whoo Whooooo!]
 
Posted by HaulinAss Motorsports (Member # 541) on :
 
quote:
Originally posted by stangin':
if i bring in a set of used heads with rockers and springs already on there, what do i tell them or ask for?

i've never gone through the process of getting heads machined/checked. i just bought a set of used gt40 heads and i obliviously want them checked out first before they go on the car. i just don't want to get ripped off b/c i don't know/understand what they're doing.

thanks.
Talk to Angie at Daves and she will take care of you. Unlike alot of ohter places they wont charge you or talk you into unneeded work.
 
Posted by illwill510 (Member # 3788) on :
 
you cant go wrong with Daves or Hubbards. Just got my motor back from Hubbards.
 
Posted by 427 StRoKeR SN94 (Member # 8722) on :
 
thanks guys
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com