This is topic Cam ?'s in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=019408
Posted by snakebit95 (Member # 8871) on
:
I'm looking to do a budget cam swap on my 95 Cobra. I'm thinking of getting Ford Racing Cam E303. Can anybody tell me what other parts I should or need to replace when I do this cam swap?
Thanks!
Posted by 1991 SSP 331 TWIN TURBO (Member # 7840) on
:
You should already have a b303, if anything set up 2 a f303
Posted by snakebit95 (Member # 8871) on
:
Is it cool for smog? Is that Cam good for the bottom end - mid range?
Posted by 93PONY (Member # 60) on
:
Crane 2031 'Kit' with the valvespring upgrade is a good choice.
Stock Cobra cams are smaller than GT cams BTW.
Posted by snakebit95 (Member # 8871) on
:
Good to know, I will check out that cam. So can I get away with just changing the springs & cam? I was told to cange lifters,rockers,pushrods & timing chain. Is that really necesary?
Posted by JohnB (Member # 969) on
:
No, it isn't necessary. Just the cam and intake gaskets, as well as a timing cover gasket set should do the trick.
Posted by F8LSN8K (Member # 7080) on
:
quote:
Originally posted by snakebit95:
Good to know, I will check out that cam. So can I get away with just changing the springs & cam? I was told to cange lifters,rockers,pushrods & timing chain. Is that really necesary?
if u dont have alot of mi stock lifters is ok, but if u have the money might as well change em. rockers and pushrods are ok, and the timing chain well it depends on if u wanna degree ur cam or not.
Fueled by Ford Mustang Owners
on CaliforniaFords.com