This is topic auto to a 5 speed conversion in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=019357

---

Posted by hes2quick (Member # 8916) on :
 
So I'm thinking about buying a 88'notchback 5.0 and it's and automatic right now and lookin to convert it to a 5 speed and was wondering. if anyone knew all the parts i needed for this. any help would be great thank you
 

---

Posted by Stangs R Us (Member # 4495) on :
 
from the block to the rearend u will need:

pilot bearing
backing plate
flywheel
clutch
throwout bearing
clutch fork
bellhousing
tranny
crossmember
driveshaft

also u will need 5spd tranny harness that goes from the trans to the inside of the car, pedals , shifter , shifter boot , shifter knob , and 3qts of ATF , and check the tailshaft seal on the back of the trans where the driveshaft goes in, along with your rear main seal on the back of the block. make sure u have a speedo gear and sensor for the trans to , whew i hope thats everything maybe even to much ha oh and make sure u have all hardware
 

---

Posted by 87GTCOBRA (Member # 7845) on :
 
I GOT EVERY THING U NEED FOR 1500
 

---

Posted by hes2quick (Member # 8916) on :
 
Wow thats alot lol thank you for the list.. and what did you mean by the hardware?
 

---

Posted by 87GTCOBRA (Member # 7845) on :
 
BOLTS WASHERE ECT TOOLS LOL
 

---

Posted by - D - (Member # 8813) on :
 
lol
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com