This is topic Cobra intake gasket questions in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=019249

---

Posted by 925GT50 (Member # 2683) on :
 
So my new upper/lower cobra intake arrived and the upper gasket is cracked somewhat do to shipping.

Can I reuse the stock one which is felpro or must I get one specific for the cobra intake?

I heard that that theyre differnt because of the ports?

Should I get a upper/lower gasket set for a 93' cobra?

Any help is appreciated im dying to get my car up and running again.

Im still running the stock e7 heads btw.

[ January 17, 2009, 02:38 AM: Message edited by: 925GT50 ]
 

---

Posted by SLPR93 (Member # 8769) on :
 
THERS A DIFF AND THEY SALE IT A KRAGENS FOR LIKE 8 BUCKS JUST FOR THE UPPER THEN RETURN UR OLD ONE AND SAY IT WAS CRACKED J/K
 

---

Posted by 91LxStang (Member # 8378) on :
 
+1
 

---

Posted by 925GT50 (Member # 2683) on :
 
Ok I found a part # for a felpro upper/lower kit. Its MS95952. WHich includes upper to lower gasket and lower to head gaskets,distributor and another gasket of some sort.

I also just noticed do I use a throttle body spacer? Ive got a 65mm BBK unit with spacer

The EGR is built into the intake unlike the stock one where it connects to the spacer.
 

---

Posted by JohnB (Member # 969) on :
 
Don't use the spacer, just the throttle body. Make sure you cap off your water crossover lines...
 

---

Posted by SLPR93 (Member # 8769) on :
 
AND THE SALE UPPER BY ITS SELF YOU DONT NEED THE OTHER ON LESS THE INTAKE DIDNT COME WITH IT
 

---

Posted by 925GT50 (Member # 2683) on :
 

quote:

---

Originally posted by JohnB:
Don't use the spacer, just the throttle body. Make sure you cap off your water crossover lines...

---

I gotcha on the spacer but the lines? i thought i needed those for the egr?
 

---

Posted by JohnB (Member # 969) on :
 
EGR is bolted to the intake...there isn't a water crossover on a Cobra intake.
 

---

Posted by 925GT50 (Member # 2683) on :
 
ok so I got some plugs also about to get a new thermostat, as well as gasket. Anything else I should replace while im at it?
 

---

Posted by 925GT50 (Member # 2683) on :
 
nvm corral solved all my questions
 

---