This is topic question about slicks in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=018573
Posted by 92_5.0 (Member # 7624) on :
 
Is it safe to run 28x10 inch Hoosier slicks on 15x8 inch rims WITHOUT tubes?
 
Posted by Buffet Boss 415 (Member # 8625) on :
 
no tubes=no beadlocks so make shure that there more than 15 psi in there or you may spin the rim inside that tire.
 
Posted by warhorse58gt (Member # 7702) on :
 
quote:
Originally posted by Buffet Boss 415:
no tubes=no beadlocks so make shure that there more than 15 psi in there or you may spin the rim inside that tire.
rim screws will fix that. [patriot]
 
Posted by 8stang8 (Member # 8082) on :
 
Im runnin a 10 inch tire on a 8 inch rim w/ no tubes, rim screws only inside, no problems till this day. But the safer the better. [patriot]
 
Posted by 92_5.0 (Member # 7624) on :
 
cool, thanks for the info guys. if i run them without tubes, i wont go any less than 20 psi, but i think i'll just get the tubes just to be safe. do you know where to get tubes other than Summit, etc. ? should local tire shops carry them? and how much do they run? thanks [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com