This is topic would f cam pass smog in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=018273
Posted by caballosalvaje331 (Member # 8137) on :
 
just like title says.
 
Posted by 302DROP (Member # 1323) on :
 
quote:
Originally posted by caballosalvaje331:
just like title says.
no it won't pass somg.. i had it on my 92 and it failed. then i changed cams and out the ecam and then it passed!!!!
 
Posted by Wolfie351 (Member # 651) on :
 
10 years with the F cam, passes every time
 
Posted by asskickn88 (Member # 4957) on :
 
I passed with a Trick Flow stage 2 and its more aggressive than the F cam so depending on your mods it should be fine.
 
Posted by SmokinLX (Member # 1684) on :
 
http://www.californiafords.com/ubb/ultimatebb.php?ubb=get_topic;f=6;t=013723#000003 lot's comes up if You run a search.
 
Posted by 95331StrimVert (Member # 6250) on :
 
yes it passes no problem. I have the cam in my car too. For the street, the E-cam is more fun. The torque and power band are about a 1100 RPM lower right where you want them to be on the street. Sure you wont make as much top end power as the F-303 but it gets scary when your searching for traction at 100MPH coming into it’s power band. On the flip side, the E-303 cam is all done by 5200 RPM no more power period, that blows…
 
Posted by 85gtcarbro8du-up (Member # 5169) on :
 
quote:
Originally posted by 95331StrimVert:
yes it passes no problem. I have the cam in my car too. For the street, the E-cam is more fun. The torque and power band are about a 1100 RPM lower right where you want them to be on the street. Sure you wont make as much top end power as the F-303 but it gets scary when your searching for traction at 100MPH coming into it’s power band. On the flip side, the E-303 cam is all done by 5200 RPM no more power period, that blows…
'the E-303 cam is all done by 5200 RPM no more power period, that blows'

i think it all depends on your setup. im runnin the e-cam and even before the blower, it pulled up to 6300 like a beast. maybe 5200 with stock iron heads.
 
Posted by svt306snake (Member # 1967) on :
 
quote:
Originally posted by asskickn88:
I passed with a Trick Flow stage 2 and its more aggressive than the F cam so depending on your mods it should be fine.
same here i even got an x cam to pass [Big Grin]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com