This is topic 94-45 cobra caliper brake line for 92 fox,,,,need help??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=018076

---

Posted by 9COBRA3 (Member # 4216) on :
 
im doing my 5 lug conversion..i have the 94-95 cobra brakes and spindle conversion..and ranger drums back...not sure what brake line to use for the calipers???? do i buy a sn-95 or fox ..or do they sell a conversion brake line ...because im not sure they are the same fitting.???please help...


p.s...just throwing it out there... will i need to change booster and master cylinder?
 

---

Posted by 86ttopgt (Member # 8279) on :
 
i have done two of these conversions. the first one was with a brembo kit and I used the stock lines that came with that kit. so if i remember right you can use the stock 94 and up lines or get braided.
 

---

Posted by Blind (Member # 3052) on :
 
I am using russell 87-93 fox mustang stainless braided brake lines on the front of my 89, which has 03/04 cobra calipers.


so basically, your stock lines will work, just make sure the banjo bolt is the right thread for the calipers.


you dont "need" to replace the booster and m/c until you put disc's in the rear, but your pedal is going to be pretty firm with the stock ones.

[ May 30, 2008, 06:41 PM: Message edited by: Blind ]
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com