This is topic 351w victor jr question in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=017718
Posted by 88coupe (Member # 7719) on
:
If i put a carberated victor jr on my 351 will i have to buy a new distributor or will the stock one fit.
Posted by Adam5.0 (Member # 6995) on
:
you would have to get a vacuum advance dist. if you dont already have one
Posted by 88coupe (Member # 7719) on
:
Does anyone know why msd sells a distributor only for the 351w with the victor jr intake.
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by 88coupe:
Does anyone know why msd sells a distributor only for the 351w with the victor jr intake.
For clearance issues with the bottom/base of the distributor to the victor jr on the crossover behind the distributor.
Posted by 88coupe (Member # 7719) on
:
So if i get the victor jr i have to get the msd distributor.
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by 88coupe:
So if i get the victor jr i have to get the msd distributor.
I have seen people just grind a little off of each the dist and the intake.
It will make your life alot easier to just get the MSD dist, plus it is a pretty nice piece.
Posted by 88coupe (Member # 7719) on
:
Ok thanks for the information.
Posted by porchstang (Member # 7937) on
:
I just used the msd dizzy but not the one for the victor jr intake just there standard dizzy with no problems
Fueled by Ford Mustang Owners
on CaliforniaFords.com