This is topic Pushrod Help? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=017691

---

Posted by Notch1320 (Member # 2647) on :
 
I am deployed with the military, and am trying to get all my parts bought to finish my car when I get back. Since I am not there to verify, I was wondering if someone could measure a stock 87-93 style 5.0 pushrod for me. I am ordering custom thick wall ones, and want to be 100% sure on the length before spending the money for them. Any help would be appreciated. I want to say they are 6.272... but I need to be sure!

Stock length is perfect for my combination, and the geometry has been checked.

Thanks, Shawn
 

---

Posted by 88blackstanggt (Member # 4654) on :
 
yup 6.272" is the stock length but depending on which heads and which roller rockers you are using, you may want to measure to have a good fit.
 

---

Posted by Notch1320 (Member # 2647) on :
 
Geometry is spot on...

Stock unported E7's heads & stock rockers,

= High 11's.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com