This is topic Boost guys chime in in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=017312

---

Posted by Curt (Member # 6254) on :
 
I have 55cc AFR 185 heads and a S-trim @10psi

What do you think of these pistons? CR too low?
(9.3 :1 with 54cc heads)

http://www.jepistons.com/cat/je/auto/ford/302_inv.shtml

They are the 1st ones on the page, -11cc dish, 508 grams

Or if you know of any cheaper but still high quality forged pistons, lmk!

[ December 30, 2007, 10:31 PM: Message edited by: Curt ]
 

---

Posted by JohnB (Member # 969) on :
 
And this is 302-based, not W-stroker, correct? If so, should be a good combo. Make sure your fuel system is up to snuff!
 

---

Posted by turbo50 (Member # 6700) on :
 
look to be a nice set of slugs, but are they going in a stock block?
 

---

Posted by Curt (Member # 6254) on :
 
Yep, its a 306.

I have 24's on it now, hoping for some 40's and tuning when I get the $$$

Yeah, its the stock block, but its nowhere near 500hp so I'm not worried about it.

Anybody know of any cheaper ones?
 

---

Posted by BlueLightning302 (Member # 3974) on :
 
with 185's and 10#'s, your closer to 500 than you think.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com