This is topic trickflow stage 1 cam in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=017294
Posted by 408GT (Member # 6677) on
:
if i have a trickflow stage 1 cam and 1.7 rockers and stock ported polish heads, will i have to upgrade valve springs.?? if so wat kind..? thanks
Posted by 95Saleen (Member # 7978) on
:
it depends on how tall your lift is on the cam. however it is recomended to always get away from stock. and you might as well put new ones on if the heads are off.
Posted by F8LSN8K (Member # 7080) on
:
quote:
Originally posted by 408GT:
if i have a trickflow stage 1 cam and 1.7 rockers and stock ported polish heads, will i have to upgrade valve springs.?? if so wat kind..? thanks
first of all, make sure u have piston2valve clearance, it should fit.......just make sure though. and YES u should upgrade ur springs. http://store.summitracing.com/partdetail.asp?autofilter=1&part=TFS%2D2500100&N=700+115&autoview=sku
Posted by 408GT (Member # 6677) on
:
quote:
Originally posted by F8LSN8K:
quote:
Originally posted by 408GT:
if i have a trickflow stage 1 cam and 1.7 rockers and stock ported polish heads, will i have to upgrade valve springs.?? if so wat kind..? thanks
first of all, make sure u have piston2valve clearance, it should fit.......just make sure though. and YES u should upgrade ur springs. http://store.summitracing.com/partdetail.asp?autofilter=1&part=TFS%2D2500100&N=700+115&autoview=sku
thanks man those where the one i was looking for, cause i ask around, in the cam that i have is .499/.510 if the springs are to big i might get some problems piston2valve.
Posted by 408GT (Member # 6677) on
:
quote:
Originally posted by F8LSN8K:
quote:
Originally posted by 408GT:
if i have a trickflow stage 1 cam and 1.7 rockers and stock ported polish heads, will i have to upgrade valve springs.?? if so wat kind..? thanks
first of all, make sure u have piston2valve clearance, it should fit.......just make sure though. and YES u should upgrade ur springs. http://store.summitracing.com/partdetail.asp?autofilter=1&part=TFS%2D2500100&N=700+115&autoview=sku
[ December 28, 2007, 04:23 PM: Message edited by: 408GT ]
Posted by Pure Stang (Member # 7251) on
:
quote:
Originally posted by 408GT:
quote:
Originally posted by F8LSN8K:
quote:
Originally posted by 408GT:
if i have a trickflow stage 1 cam and 1.7 rockers and stock ported polish heads, will i have to upgrade valve springs.?? if so wat kind..? thanks
first of all, make sure u have piston2valve clearance, it should fit.......just make sure though. and YES u should upgrade ur springs. http://store.summitracing.com/partdetail.asp?autofilter=1&part=TFS%2D2500100&N=700+115&autoview=sku
thanks man those where the one i was looking for, cause i ask around, in the cam that i have is .499/.510 if the springs are to big i might get some problems piston2valve.
i dont think you should have ptv clearance issues. the lift in my cam is over 500 and i got stock springs. they are barely starting to get weak after 3years.. lol time to change them.
Fueled by Ford Mustang Owners
on CaliforniaFords.com