This is topic 96 cobra parts on a fox??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=017177

---

Posted by 50boi (Member # 7878) on :
 
i recently picked up a set of 13" cobra brakes that im going to use with my 5 Lug conv.


it also came with cobra K member,upper/lower control arms,springs,shocks


is any of this stuff better than the stock shit on my 93' GT???
 

---

Posted by Blind (Member # 3052) on :
 
k member wont fit, the control arms probably have newer bushings though.
 

---

Posted by MPP*formerly t-top50* (Member # 2735) on :
 
my 2 cents

pull you a-arms and replace the bushings. Then press out the ball joints and press in some new 94-95 ball joints. And the obvious run 94-95 hub and spindles. Bolt up the 13" and run drums in the rear, or spend the money and switch out to disk rear.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com