quote:

---

Originally posted by racsirx:
I believe the outer bearings are the same but the inner bearings are different.

---

Lincoln Outer bearings And Fox inner bearings? lmk lee ,im going to get this today
 

---

Posted by racsirx (Member # 1710) on :
 
Fox outer bearings and lincoln inner bearings.
 

---

Posted by Eddie510- (Member # 2354) on :
 
nOT HAVING THE RIGHT TOOLS makes this job a pain in the ASS! its 2:16
 

---

Posted by Eddie510- (Member # 2354) on :
 
OK I HAVE THE RIGHT TOOLS. aND i put the 87 saleen spindle on with the 5lug rotor. NOW Im having trouble!The damn Spindle will line up to the bottom bolt that connects to the SHOCK but the Top hole WILL not line up to put the other bolt in! My car was a 4 cyl fox so can the SHOCKS up front be an issue?AND NOW I tried to take the spindle off the balljoint,it losens up but the bottom of the rotor hits the fucking control arm and it will not come off lmk, pls asap. i will buy them today if anyone has them!

[ September 29, 2007, 03:40 PM: Message edited by: Eddie510- ]
 

---

Posted by Eddie510- (Member # 2354) on :
 
ARE THE 4cyl A ARMS Diffrent than the v8 foxes? cause now i cant fucking take my fucking SPINDLE out of the damn aarm because the bottom of the rotor+the sheild is getting stuck from the bottom Ive dont a swap before and this one is just a bitch, anyone pls help..........k i was able to take the spimdle out, took the rotor off first than the spindle,

[ September 29, 2007, 04:22 PM: Message edited by: Eddie510- ]
 

---

Posted by Eddie510- (Member # 2354) on :
 
ttt
 

---

Posted by Blind (Member # 3052) on :
 
if your front struts are still stock from the 4cyl stuff, you won't be able to bolt them to v8 spindles.


the control arms are the same, but the spindles and struts are different.


good luck homey
 

---

Posted by Eddie510- (Member # 2354) on :
 

quote:

---

Originally posted by Blind:
if your front struts are still stock from the 4cyl stuff, you won't be able to bolt them to v8 spindles.


the control arms are the same, but the spindles and struts are different.


good luck homey

---

OMG you SAVED THE DAY BLIND, ive been trying to bang the shit of of it, yeah i think they are 4 cyl shocks. thanks you so much , your the 2nd one i owe a bear 2 now hope i find some free stock shocks for now
 

---