This is topic Bolt size on Struts in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=016765
Posted by Blue88lx (Member # 5919) on
:
Im changing the struts on my 88LX, what are the bolt size on the bottom bolts? Thanks!
Posted by 89goose (Member # 7196) on
:
21mm i believe
Posted by 89goose (Member # 7196) on
:
21 metric i believe - ill check my tools and repost if im wrong
Posted by 89goose (Member # 7196) on
:
correction is 24 metric
Posted by Curt (Member # 6254) on
:
if you don't have a impact wrench...good luck!
I had to take the strut w/ mount off the car, put a BIG pair of vise grips on the shaft, but it has to be TIGHT so I had to set it where it wouldn't lock and then jump on it to close.
Then, try the bolt, one of mine STILL wouldn't come off so I had to cut it and use a chisel to break it off, oh and new nuts are nearly impossible to find
Posted by gt1990gt (Member # 7211) on
:
quote:
Originally posted by Curt:
if you don't have a impact wrench...good luck!
I had to take the strut w/ mount off the car, put a BIG pair of vise grips on the shaft, but it has to be TIGHT so I had to set it where it wouldn't lock and then jump on it to close.
Then, try the bolt, one of mine STILL wouldn't come off so I had to cut it and use a chisel to break it off, oh and new nuts are nearly impossible to find
Did the same shit!! pain in the assssss
Posted by Blue88lx (Member # 5919) on
:
quote:
Originally posted by gt1990gt:
quote:
Originally posted by Curt:
if you don't have a impact wrench...good luck!
I had to take the strut w/ mount off the car, put a BIG pair of vise grips on the shaft, but it has to be TIGHT so I had to set it where it wouldn't lock and then jump on it to close.
Then, try the bolt, one of mine STILL wouldn't come off so I had to cut it and use a chisel to break it off, oh and new nuts are nearly impossible to find
Did the same shit!! pain in the assssss
Thanks guys, it was a pain in the ass!!!
Posted by Camaro Kid Z/28 (Member # 3100) on
:
quote:
Originally posted by Curt:
if you don't have a impact wrench...good luck!
I had to take the strut w/ mount off the car, put a BIG pair of vise grips on the shaft, but it has to be TIGHT so I had to set it where it wouldn't lock and then jump on it to close.
Then, try the bolt, one of mine STILL wouldn't come off so I had to cut it and use a chisel to break it off, oh and new nuts are nearly impossible to find
i called kyb when i lost mine and they sent me a pair free of charge! there is a part number as well.
Fueled by Ford Mustang Owners
on CaliforniaFords.com