This is topic Gear install: what should I listen/feel for after install? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=016440
Posted by 50 Deep (Member # 6216) on :
 
So my 4.10's are goin in today and I needa know what I should listen and feel for once they are done So I know there in correctly? I'm having the whole rear rebuilt with all new parts so it should be quiet as it was stock right? With no weird noises in reverse and such?
 
Posted by BOTIH8R*pbr* (Member # 7295) on :
 
what brand gears did you buy because ive heard even properly installed gears can have some whining.especially in 4.10's and up
 
Posted by 50 Deep (Member # 6216) on :
 
Its all ford racing components. So im expecting for it to be a little louder but I mean as far as like a whine, or klunks?
 
Posted by BOTIH8R*pbr* (Member # 7295) on :
 
no clunks but you may get a very little bit of whine.but if anything youll barely hear it.
 
Posted by subsGT (Member # 6015) on :
 
quote:
Originally posted by BOTIH8R*pbr*:
no clunks but you may get a very little bit of whine.but if anything youll barely hear it.
what's up if there are 'clunks' between shifts?
 
Posted by JohnB (Member # 969) on :
 
Could be anything from a loose driveshaft, worn out output shaft, bad u-joints, loose lugnuts, to a possible incorrect install.
 
Posted by 50 Deep (Member # 6216) on :
 
quote:
Originally posted by subsGT:
quote:
Originally posted by BOTIH8R*pbr*:
no clunks but you may get a very little bit of whine.but if anything youll barely hear it.
what's up if there are 'clunks' between shifts?
Doesn't it mean the pinion depth is off? So when powers bein transferred thru the ring & pinion there's too much space so u hear them slapping as they engage [Confused]
 
Posted by subsGT (Member # 6015) on :
 
quote:
Originally posted by 50 Deep:
quote:
Originally posted by subsGT:
quote:
Originally posted by BOTIH8R*pbr*:
no clunks but you may get a very little bit of whine.but if anything youll barely hear it.
what's up if there are 'clunks' between shifts?
Doesn't it mean the pinion depth is off? So when powers bein transferred thru the ring & pinion there's too much space so u hear them slapping as they engage [Confused]
maybe...had a 98 GT that did that but there were never any problems..it had gears/aluminum D/S...
[Confused]
 
Posted by nine (Member # 6732) on :
 
properly installed FRPP gears should make as much "noise" as stock, IOW, almost none.
 
Posted by 50 Deep (Member # 6216) on :
 
@ this point the gears have a whine in 4th & 5th. only when i first get on the gas or when i first let off but its somewhat loud. no klunks tho. only have around 50 or so miles on them. so is this part of the break in or something being off?
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com