This is topic Removing T5 on SN95...TOP 2 TRANNY BOLTS in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=016392
Posted by Eddie510- (Member # 2354) on
:
Im putting a new clutch on my sn95. Whats the best way in taking off the top to bolts on the tranny? Do i need to take off the upper plenum? i have big ass hands so its being a bitch! lmk any advice, thanks
[ July 03, 2007, 09:35 PM: Message edited by: Eddie510- ]
Posted by rickm347 (Member # 5323) on
:
one of the easiest ways ive found to remove those 2 bolts after removing exhaust, driveshaft, draining trans fluid, is to:
*put a jack under the tranny.
*undo the tranny mount
*lower the jack
*now you should have clearance through the tranny tunnel. Use extensions and a swivel. the swivel goes right after the socket, then like 2 feet of extensions going through the trans tunnel and you should be able to get to the bolts. . . .--rick
Posted by Eddie510- (Member # 2354) on
:
hey rick thanks for the help now i just need to find a damn swivel i cant find mine. i did what you told me to do, there is more space now but def need a swivel im thinking of just takeing the upper plenum off, damnit
Posted by BlowN67 (Member # 4229) on
:
yup did it that same way
Posted by rickm347 (Member # 5323) on
:
either go to the parts store and get one or find a 12 point socket to git er' done
*also, i would not suggest taking off the upper because your gonna have to buy a new gasket instead, you can just take that money that you wouldve spent and go buy a damn swivel --rick
Posted by street_illegal_stang (Member # 1554) on
:
i had good luck using a gearwrench. didn't have to remove the plenum just the h pipe.
but of course don't break the bolts with the gearwrench.
get two wrenches and use one of them to leverage the other wrench. its ghetto but works
[ July 04, 2007, 01:46 AM: Message edited by: street_illegal_stang ]
Posted by Eddie510- (Member # 2354) on
:
quote:
Originally posted by rickm347:
either go to the parts store and get one or find a 12 point socket to git er' done
*also, i would not suggest taking off the upper because your gonna have to buy a new gasket instead, you can just take that money that you wouldve spent and go buy a damn swivel --rick
LoL yeah i thought about that after,lol . Well i got it out with out the swivel but for sure im going to need a swivel when back in. never did work on a sn95 and never will again, i hate these bodies with a passion! thanks rick
Posted by wathefuc (Member # 6672) on
:
I have a better idea...remove the bolt and throw away the transmision and even the engine.
Posted by Curt (Member # 6254) on
:
quote:
Originally posted by wathefuc:
I have a better idea...remove the bolt and throw away the transmision and even the engine.
Troll
Posted by 166 Merlot (Member # 1549) on
:
got an air ratchet? try that
Fueled by Ford Mustang Owners
on CaliforniaFords.com