This is topic What do i need w/heads??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=016010
Posted by CSR1909 (Member # 7400) on :
 
So i've been doing some research and am about to get my car worked on by JohnB (nice guy btw), and i'm wondering if anyone has any input or suggestions before i gather up all the parts. So far i'm gonna get some AFR 165's, valve springs, 1.6 roller rockers, intake manifold, a cam, what else am i leaving out? i'm relatively new to all of this so i'm just getting together a parts list. I will eventually be supercharging the car so i hope you guys can help me out.
 
Posted by court (Member # 6700) on :
 
inserts, head bolts,gaskets, pushrods

I have everything you need but the gaskets and head bolts.

Asking $350 in the classified section (had to throw that in there [Smile]
 
Posted by SmokinLX (Member # 1684) on :
 
Fuel pump, throttle body, intake spacer, fuel injector's, mass air calibrated for 24's, header's, and probably gear's if You don't have em yet.
 
Posted by Pure Stang (Member # 7251) on :
 
you have any suspencion work? also since your going s/c later i would get bigger cc on the afr's i think they go up to 62....
 
Posted by CSR1909 (Member # 7400) on :
 
people keep telilng me just to get that twisted wedge kit... I have about 2500 to spend on the combo minus the blower which is gonna come later.
 
Posted by Curt (Member # 6254) on :
 
you could prob get away with the 19's if you upped the fuel pressure
 
Posted by hockeyguy713 (Member # 5354) on :
 
pm sent
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com