This is topic Injected to Carb 331? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015789
Posted by mnstruc (Member # 5652) on
:
I have a nicely built 331 stroker, with Edlebrock Performer heads that came out of my 89 Convertible. I want to run this motor in my '65 Mustang, only I want to change the intake system and run a carb. I have an E-303 cam in this motor. So my question is this, can I simply change the induction system without changing the cam, or will I need to get a non FI computer type cam?
Posted by 67stang (Member # 549) on
:
you do not need to change the cam. you will need to change the distributor also however and be sure to use a steel distributor gear, or swap the one from the EFI distributor. If you use an iron gear it will get ground up and damage your motor.
[ March 20, 2007, 05:19 PM: Message edited by: 67stang ]
Posted by MustangNate (Member # 4559) on
:
If you are hurtin' for cash for a distributor, you can run a distributor & ignition module from a carbureted 85 Mustang. AutoZone wants like $150 for both of them.
Just be sure to get the steel gear! ![[Smile]](smile.gif)
Fueled by Ford Mustang Owners
on CaliforniaFords.com