This is topic what u think in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015724
Posted by Duncan Motors (Member # 7045) on :
 
roller 351, gt 40 heads, carbed, with nos, everything lower end stock ,heads stock ,with e cam, 85 hatch 410 gears good posi.i know it might not last long but just wanna play with least amount of money as possible till my other motor goes in should be fun till then . just curiouse what u guys think should maybe change the cam, should the gt heads springs hold if i don't over rev what should i rev this to . i'll be onest i was gonna floor it till it dies off i don't even really care it's just for fun but some info could help don't wanna blow it up to soon.o yeah tremmic 5 speed alum fly wheel u think aluminum fly wheel is good for hard launches?
 
Posted by 92stangLX (Member # 3252) on :
 
I would try and get a better set of heads if possible. You can probably do better with another cam but I'll let the cam experts answer that one [Smile]
 
Posted by 1FAST89GT (Member # 5071) on :
 
i think you are gonna scare your chickens [Big Grin]

what exhaust are u gonna run?
 
Posted by Duncan Motors (Member # 7045) on :
 
shortys with a bbk x an dumps just so i can dust clould the farm animals.
 
Posted by GRIGGYJAMESJIMBO (Member # 6319) on :
 
351/n2o/411Gears? The 351 with the juice will supply a lot of torque. You need the right suspension to put all that power to the ground. SLICKS? DR's? Im kind of iffy on the gears, my boi runs a 150shot on a 302/h/c/i with 373 gears and it's hard for him to get traction all the way trough 3rd gear.... [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com