This is topic Any dyno shops in or around hayward in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015436
Posted by 89TRUNK (Member # 2506) on :
 
this will be for a carbed application. Thanks
 
Posted by TRIXSNK (Member # 2844) on :
 
Looking for Dynojet or Mustang dyno #'s

Not likely for tuning i bet [Razz]

My buddy has an AWD Mustang Dyno in UC.

CDT has a Mustang dyno in Hayward.

Nick has a Dynojet in Hayward.

I think someone has dynapacs in Hayward also.

I may be forgeting 1 or 2 but i believe those are about it.

[ January 19, 2007, 01:11 PM: Message edited by: TRIXSNK ]
 
Posted by 89TRUNK (Member # 2506) on :
 
whats the diff. in a mustang dyno and dynojet? I didn't know there were so many around... Definately not for tunning lol, what's the avg price and how many pulls do you get, and is there anybody you reccomend for a carb application (might try to do it myself).. I just need about 4 or 5 runs with minor tuning, nothing too radical
 
Posted by TRIXSNK (Member # 2844) on :
 
quote:
Originally posted by 89TRUNK:
whats the diff. in a mustang dyno and dynojet? I didn't know there were so many around... Definately not for tunning lol, what's the avg price and how many pulls do you get, and is there anybody you reccomend for a carb application (might try to do it myself).. I just need about 4 or 5 runs with minor tuning, nothing too radical
W/o getting too technical they vary in the fact that Mustang #'s tend to read about 10% lower than Dynojets for the most part give or take.

It all has to due with the way in which each system calculates rwhp.

When you throw tuning in the mix it will highly depend upon if the owner/operator of the dyno has the ability to tune carbed applications.

If not you'll need to hire a tuner and rent the dyno time.

Avg. prices just for pulls is usually around $75-100 for about 3 pulls including your s/f ratio.

edit: I meant A/F ratio [Razz]

Also if you feel like making adjustments on the dyno i don't the operators would have too much of a prob w/ that unless it is stated that you can't make adjustments as they may charge you dyno rental time which can vary but may avg. about $100/hr.

[ January 19, 2007, 02:33 PM: Message edited by: TRIXSNK ]
 
Posted by 89TRUNK (Member # 2506) on :
 
ok, thanks... either one should work since i don't really care what #'s it shows as long as they get better than what i baseline at on the 1st pull
 
Posted by 89TRUNK (Member # 2506) on :
 
Where is Nick's dynojet in Hayward and CDT's also? what's the shop called (nick's) and would you happen to have a # for them? Thanks
 
Posted by TRIXSNK (Member # 2844) on :
 
Ok now your askin for too much lol [Razz]

Nick at Newtech Performance sorry i don't have the # off hand but someone that seees this may.

Nick's shop is in the industrial area off W. Winton Ave. almost to the junk yard.

CDT is located at Rob's Auto Machine shop off Industrial.
 
Posted by 89TRUNK (Member # 2506) on :
 
Can you call either one and pencil me in for next saturday around 10 am [Big Grin] ....haha Thanks for the info it's much appreciated.. i'll call em up and see what they can do
 
Posted by 1siclx (Member # 7036) on :
 
Nick's number is 510-785-3278 he's off of winton.

He's having a dyno day february 10 50 for 2 pulls with a/f heres the thread on norcal-ls1

http://www.norcal-ls1.com/forum/showthread.php?t=52525&page=1
 
Posted by TRIXSNK (Member # 2844) on :
 
quote:
Originally posted by 89TRUNK:
Can you call either one and pencil me in for next saturday around 10 am [Big Grin] ....haha Thanks for the info it's much appreciated.. i'll call em up and see what they can do
Sure let me see what are schedule has available [Big Grin]

I knew i was in the wrong line of work (stoopid health care) [Razz]
 
Posted by 89TRUNK (Member # 2506) on :
 
anybody know if CDT is open today, i've called them several times but no answer
 
Posted by bottled95GT?? (Member # 1772) on :
 
NextGen MotorSports, mission Blvd past Ast, next to where Hayward Mitsubishi was
 
Posted by 95whitegt (Member # 3205) on :
 
yea nextgen, shoot i was there today, and there was a black gt there on the dyno,
 
Posted by 89TRUNK (Member # 2506) on :
 
ya i called them, might make an appointment for sat...
 
Posted by FoX GT (Member # 4587) on :
 
quote:
Originally posted by 95whitegt:
yea nextgen, shoot i was there today, and there was a black gt there on the dyno,
http://www.nextgenautosport.com/
 
Posted by 89TRUNK (Member # 2506) on :
 
Went to the dyno on sat morning, it was a mustang dyno...

317 @ 6286 HP
290 @ 4310 TQ

ohhh forgot to add... it's a chebby
 
Posted by carajo (Member # 4426) on :
 
what kind of chebby?
 
Posted by 89TRUNK (Member # 2506) on :
 
73 camaro
 
Posted by carajo (Member # 4426) on :
 
so.......
you went to the dark side. [Razz]
 
Posted by 89TRUNK (Member # 2506) on :
 
going back to my roots... lol...These days i have to have a garage to park a mustang or else i'll just be waiting for it to get stolen...I don't have to worry about a camaro getting stolen, nobody wants those..and i coulnd't find what i wanted, 86 5 spd coupe
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com