This is topic help which mass air to buy in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015278
Posted by 90cobraclone (Member # 6354) on
:
302 bored .020 over
Vortech sc-trim supercharger 7psi
UPR power pipes
GT-40 heads (93 svo heads)
Comp Cams .544/.544 lift cam
Comp Cam high lift valve springs
Crane 1.7 roller rockers
190 lph fuel pump
Adj. Fuel pressure regulater
Ford Motorsport 24# injectors
Trick Flow upper & lower plenum
Power product 70mm throttle body
C&L 76 mm mass air for 24# injectors
MAC 1 5/8 equal length shorty headers
2 ˝” X-pipe with 2 chamber flows
Smog pump delete
MSD 6AL ignition
MSD 8.5mm wires
P.M.S stand alone engine mangement
MAC under drive pullies
do i get c&l 80mm or lightning 90mm also was going to upgrade to 42# injectors when i do mass air
Posted by 50DADDY (Member # 3076) on
:
I think an 80mm would work fine.
Posted by 92stangLX (Member # 3252) on
:
If you get a lightning maf you will probably need a tune to make it work but that would be a better meter.
Fueled by Ford Mustang Owners
on CaliforniaFords.com