This is topic CONVERT TO 5 LUG DISC ON 65 4LUG DRUM?? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015223

---

Posted by 89 FAKE SNAKE (Member # 4531) on :
 
Iv been hearin bout tha granada swaps..how would this kit work and would there be anything else id need?

www.discbrakeswap.com its under catalog..
 

---

Posted by 92stangLX (Member # 3252) on :
 
I've done it on my 66' Mustang and was very happy with it. Make sure the kit comes with the correct tie rod ends and get an adjustable proporitioning valve.

I just went to the junk yard and pulled all of the spindles, hubs, rotors, lines off of a '76 Granada. You can get the tie rod ends from Mustang Plus in Stockton (www.mustangplus.com) and the proportioning valve Summit.

You'll save yourself a bunch of $$$ doing it this way.
 

---

Posted by 89 FAKE SNAKE (Member # 4531) on :
 
tha kit comes wit a adjus valve...wha else would i have to change? tie rods? etc..

[ December 09, 2006, 05:42 PM: Message edited by: 89 FAKE SNAKE ]
 

---

Posted by MUSTANG65_347 (Member # 7249) on :
 
Check out www.mustangsteve.com In the tech section he explains how to do the granada swap.
 

---

Posted by 89 FAKE SNAKE (Member # 4531) on :
 
TTT...anyone know where to get 96+ cobra brake kits?
 

---

Posted by Blind (Member # 3052) on :
 
Here's a drum to wilwood 4 piston disc brake conversion from SSBC -
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SSB%2DA120D&N=700+4294908331+4294908282+4294922533+115&autoview=sku
 

---

Posted by 66backinblack (Member # 5372) on :
 
thats what i used on my car, except i already had five lug. its an easy kit though, only took me a couple of hours
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com