This is topic trans??? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015184
Posted by FONYPONY7o7 (Member # 7208) on
:
what does EEC-IV refering to a tranny stand for????
Posted by Blind (Member # 3052) on
:
absolutely nothing.
EEC-IV refers to the ECU, or engine control unit. Like OBDII for 1996+ cars.
EEC-IV auto tranny's like the AOD are not computer controlled at all.
Posted by FONYPONY7o7 (Member # 7208) on
:
right on i didnt know but i did kno about the obd 1 and 2 i did a swap on my notch from a 4 clin ado to a 50 t5 i was wondering if there was any wires or harness i need to change from a ado to a t5 ????
Posted by Blind (Member # 3052) on
:
you should get the trans harness from a t5 car, so the neutral switch and backup lites function right.
the harness connects in the drivers side kickpanel and runs under the carpet to a grommet in the trans tunnel where it connects to the trans.
takes 30 seconds to swap if you have the center console and front seat out.
Posted by FONYPONY7o7 (Member # 7208) on
:
so i wont have any reverse lights? is that it or will i throw any codes on the cluster???
Fueled by Ford Mustang Owners
on CaliforniaFords.com