This is topic shaking t5 in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=014740
Posted by 92highway (Member # 6542) on :
 
once i go about 70mph and let go of the gas my t5 shakes if i hold the gas down its fine but once i let go it shakes.shakes the whole middle consule. what could it be
 
Posted by PopTheHood (Member # 7040) on :
 
the bolts to the crossmember, bellhousing, or from the bellhousing to the motor could be loose.. check to see if they are loose..., also check your motor mounts

[ September 13, 2006, 06:47 PM: Message edited by: PopTheHood ]
 
Posted by 92highway (Member # 6542) on :
 
checked and tightened all bolts to crosmember bellhousing still does it i think it might just be the motor mounts will check tomorrow thkns
 
Posted by 1991CHP (Member # 5097) on :
 
Let me know what yah find, mine is doing the same thing???????????

[patriot]
 
Posted by bigg matt (Member # 1643) on :
 
check your drive shaft bolts, make sure they are tight. also, it could be that you may need a new u-joint. let us know what it was
 
Posted by COUPE ON DUBZ (Member # 5034) on :
 
its the u-joint my friends did the same just replace a new driveshaft it should be fix?
 
Posted by 92highway (Member # 6542) on :
 
havnt had time with work and shit but its still doing it actually a lil less now. im just going to take it to someone to check it out.
 
Posted by Sk8OnGlass (Member # 6370) on :
 
its the u-joint [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com