This is topic Installing new clutch in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=014168
Posted by 1990Silver5.0 (Member # 6210) on
:
I just bought a new clutch from kragens. This will be my first time installing 1 so i would like to know how hard it is and how long it will take.
Posted by poisonpony96 (Member # 3942) on
:
not to hard it is good to have two people to take the transmission in and out. might take 4 hour really depends on your wrenching abilities
Posted by 1990Silver5.0 (Member # 6210) on
:
alright thanks
Posted by SF Coupe (Member # 1810) on
:
It will take a lot longer than four hours if it's your first time. Don't forget to have your flywheel resurfaced or get a new one. Change the pilot bearing and the rear main seal if it leaks. The driveshaft bolts are on there REAL tight. I had to use a jack on the wrench to break them loose. Drain the tranny before you start or the fluid will spill all over the place. It's not hard at all, just a lot of steps.
Fueled by Ford Mustang Owners
on CaliforniaFords.com