This is topic Motor Mounts? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=014110
Posted by 93Cobra50 (Member # 4602) on :
 
I remember someone on here saying a certain type of motor mount needed modification to fit. Was that the energy suspension mounts? What brand should I but that will slap right in. Polyurethane of course.
 
Posted by 92stangLX (Member # 3252) on :
 
I think the thread was refering to Prothane poly mounts. I have a set and didn't need to do any modifications. Although, they seem to move the engine up a bit higher.
 
Posted by 93Cobra50 (Member # 4602) on :
 
Thanks
 
Posted by 88DroptopGT (Member # 2535) on :
 
OEM convertible motor mounts are just as good.

Get them from Kragen with Lifetime warrenty if you keep the receipt.

Change every couple years if necessary. [Wink]
 
Posted by 5OHS5OH (Member # 4665) on :
 
I bought the poly convertable ones from 50resto.com Just be sure to unbolt your vacuum tree. The twisting of the motor when I installed mine cracked the tree and made a leak.
 
Posted by Curt (Member # 6254) on :
 
they were prothane

They are too big cause they have the four bolts holding them together, also they move the motor WAY higher, I had to take off my strut towerbrace and I had to get my h-pipe re-welded to fit, a real PITA, just get OEM ones
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com