This is topic Need Panhard bar and Torque Arm welded in in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=014108
Posted by kkd (Member # 4356) on :
 
Can anyone recommend a good welder or a good shop with reasonable rates to weld in my Maximum Motorsports torque arm and panhard bar? Please, don't recommend Apex, I am aware of those guys.
I am around the San Jose area. Any help or suggestions would be appreciated. Thanks
 
Posted by jmoney347 (Member # 4702) on :
 
hands down best around spec-fabrication pm him. virgil is great
 
Posted by r3dn3ck (Member # 3192) on :
 
Apex. They do all my work. Great guys, great shop. Can't see what you have against them. Perhaps you've been listening to the ignorant whiners that complain about work they've never seen being done.
 
Posted by jmoney347 (Member # 4702) on :
 
was your little apex comment directed towards me?
 
Posted by hidnn.o.s. (Member # 1219) on :
 
quote:
Originally posted by r3dn3ck:
Apex. They do all my work. Great guys, great shop. Can't see what you have against them. Perhaps you've been listening to the ignorant whiners that complain about work they've never seen being done.
1 or 2 people may be wrong, but when you have as many people with problems from Apex's new owner, there has to be a reason...........

You can plead ignorance.
 
Posted by two-gun kid (Member # 5891) on :
 
quote:
Originally posted by hidnn.o.s.:
quote:
Originally posted by r3dn3ck:
Apex. They do all my work. Great guys, great shop. Can't see what you have against them. Perhaps you've been listening to the ignorant whiners that complain about work they've never seen being done.
1 or 2 people may be wrong, but when you have as many people with problems from Apex's new owner, there has to be a reason...........

You can plead ignorance.
cant we all just get along
[Roll Eyes]

[ May 20, 2006, 12:21 PM: Message edited by: two-gun kid ]
 
Posted by 1Sicgt (Member # 714) on :
 
Bugformance in San Jose, they are supposed to have some good fabricators there. They are off Capitol and Alum Rock.
 
Posted by NO MANRZ (Member # 566) on :
 
Another great option is Custom Alignment in Mountain View.

http://www.customalignment.com/

They do great work but they are not the cheapest. They can corner balance the car and setup the front for bump-steer too. Most shops don’t even know how to setup the front for bump-steer. They just say it’s a part you can buy. LMAO!
[Big Grin]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com