This is topic Modifying stock steering knuckle on a fox.. in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013874
Posted by Bottle Fed (Member # 2686) on
:
Like the title says...has anyone ever modified their stock steering knuckle to eliminate their rag joint from the steering setup for more solid steering...i am finishing off my k-member setup and wondered if anyone has just drilled out the rag joint and then bolted it straight to the clip that slides onto the rack...thanks..Paul...
Posted by jordan_0806 (Member # 5888) on
:
quote:
Originally posted by Bottle Fed:
Like the title says...has anyone ever modified their stock steering knuckle to eliminate their rag joint from the steering setup for more solid steering...i am finishing off my k-member setup and wondered if anyone has just drilled out the rag joint and then bolted it straight to the clip that slides onto the rack...thanks..Paul...
I have but damn was it a pain in the ass...
1st I cut the bar that holds the two bolts in place....
then I had to grind down each bolt o nthe end to allwo it fit....next I had to use different nuts and lock washers on each one so that it would lock on to the rubber padding..
it seems to work fine this way...
Fueled by Ford Mustang Owners
on CaliforniaFords.com