This is topic Need help 4.6L look inside please!! in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013645

---

Posted by PurpleNotch (Member # 2902) on :
 
hey guys I need to know where you would put the sending unit for a water temp gauge on a 4.6 like my cobra. please help pictures would be awsome. Thanks...
p.s. thanks john b for all the help it still is overheating im going bananas
 

---

Posted by gtstang03 (Member # 5472) on :
 
I actually installed mine on the side of the block, driver side, right before the motor mount. There is a plug there that i took out and installed my autometer watertemp sending unit went right in
Mine is s 2v and the 4v mightb e a different on there cooling system.
 

---

Posted by BlacksheepMod50 (Member # 2378) on :
 
I installed mine in the crossover tube on the intake manifold - Again, this is a 2V, but if you just find the stock sending unit, you can put it near that.
 

---

Posted by gtstang03 (Member # 5472) on :
 

quote:

---

Originally posted by BlacksheepMod50:
I installed mine in the crossover tube on the intake manifold - Again, this is a 2V, but if you just find the stock sending unit, you can put it near that.

---

quote:

---

Originally posted by gtstang03:

quote:

---

Originally posted by BlacksheepMod50:
I installed mine in the crossover tube on the intake manifold - Again, this is a 2V, but if you just find the stock sending unit, you can put it near that.

---

yes that is another option. I did not do this as i want my stock Dummy gauge to still work.
Do the 98's have 2 on the crossover?

---